#2 - DOLBY CP650 DIGITAL CINEMA PROCESSOR SER # 513369 / CAT 773 & 790 INSTALLED

Description

DOLBY CP650 DIGITAL CINEMA PROCESSOR SERIAL # 513369 (QUANTITY 1)
CP650 Digital Cinema Processor. The Dolby CP650 series is designed for easy operation in today’s multiplex environment. A variety of models provide flexibility of configuration choices from film playback to digital cinema audio.
External setup software allows complete control of all processor calibration settings from a laptop computer, including the EQ Assist system that enables a rapid initial equalization of the theater. Audio processing configurations may include Dolby Surround 7.1 (D-cinema audio), 5.1 digital PCM (D-cinema audio), Dolby Digital Surround EX (film and bitstream), Dolby Digital (film and bitstream), Dolby Pro Logic, and digital noise reduction processing (Dolby A-type and Dolby SR).
Main Audio Output
25-pin male D-connector, balanced or floating
Maximum level, balanced loads: +26 dBu (15.5 V)
Maximum level, unbalanced loads: +20 dBu (7.75 V)
Dolby level output adjust range: –31 to –12 dBu (20–780 mV)
Option Card I/O
25-pin female D-connector for digital bitstream input and surrounds output when equipped with the Cat. No. 790 option card L, C, R mid and high crossover outputs with Cat. No. 791 option card
Nonsync Inputs
RCA-type female phono connectors for two stereo nonsync sources Input impedance: 21 kΩ
Sensitivity: 0.2–4 V (NS 1), 0.06–1.5 V (NS 2)
Six-Channel Audio Input
25-pin female D-connector for external six-channel analogue source
Input impedance: 10 kΩ (L, R), 27 kΩ (C, Ls, Rs, SW)
Operating level: 300 mV
RS-232C Serial Data Input Port
9-pin female D-connector to connect external PC for setup and automation control
Ethernet Connector
RJ-45 female for automation control and subtitling timing data
Microphone Input
XLR female connector, balanced, for Auditorium Assist, PA, or B-chain alignment mic (or multiplexer)
Phantom power available (+15 V)
Optical Inputs
9-pin female D-connectors, balanced, for two stereo solar cells or analogue LED readers
Power available for external cell preamp circuits (±14 V/40 mA)